The Mini-USP #11010 is unfortunately no longer available. To back up power supplies we have introduced the maintenance-free, capacitive Buffer Module #11011 to our line.
Requires only a battery (included) for the 24V output
Regulated output voltage (nom. 24V) for backup
LEDs or relay contacts for status indication
Charging time: approx. 3 hours
Compact top-hat rail housing: 123x 124x 119mm
Full output capacity up to +40°C
Standards-conformal for both office and industrial environments:
Increased noise immunity for industrial areas
Stricter noise emission for residential and commercial areas
Background information: Depending on where they are used, it cannot always be assured that electronic devices have the necessary supply voltage available in an interruption- and noise-free form.
When it comes to servers, large uninterruptible power supplies (UPS) are used to address these issues. For less power-hungry consumers these power supplies are however vastly oversized, and in most cases their use is not practical due to size, weight and cost.
For such applications W&T offers a small, mini-UPS which together with the powered devices can be mounted on a DIN rail and, in spite of its small size, ensures hours of 24V supply.
The Mini-UPS 11010 enables noise-free and uninterrupted supply for critical consumers where for example logging of measured values makes continuous operation absolutely necessary.
Data loss and device failure caused by power supplies can be simply prevented by inserting the UPS into the power supply. Regardless of the quality and availability of the mains voltage, the UPS provides a regulated, clean output voltage to the consumers over a long period of time.
Technical data:
Input voltage:
22.8 - 30V DC
Switching threshold for buffer operation:
22.25V DC
Output voltage:
Non-buffered: 0.3V below input voltage Buffered: 22.25V @ 10A
Output current:
15A (non-buffered) 15A (buffered, first 5 sec.) 10A (buffered)
Time limit for buffer operation:
0.1 / 0.5 / 1 / 3 / 10 / ∞ min.
max. bridge time:
approx. 9 hours @ 100mA
Rechargeable battery:
Lead-gel battery (12V, 5Ah)
Adapters:
2x spring terminal (Input / Output) 4x screw terminal (Ready / Buffering / Replace Bat. / Inhibit)
Operating temperature:
-0..40°C
Storage temperature:
-20..50°C
Weight:
2850 g
Dimensions:
123 x 124 x 119 mm
Approvals:
UL, CSA, GL
The Mini-USP #11010 is unfortunately no longer available. To back up power supplies we have introduced the maintenance-free, capacitive Buffer Module #11011 to our line.
