W&T connects
Interfaces for TCP/IP, Ethernet, RS-232, RS-485, USB, 20mA, glass and plastic fiber optic cable, http, SNMP, OPC, Modbus TCP, I/O digital, I/O analog, ISA, PCI
Data sheet:

24V / 24W power supply for DIN rail mounting

DIN rail mount power supply, 24 Watt

Power supply with wide-range input 100..240V incl. CE marking and UL approval

Properties

General information:

  • High efficiency: typ. 84%
  • Limited Power Source (LPS)
  • Generous operating temperature range: -20..+70 degrees Celsius
  • Compact DIN rail housing: 22.5 x 90 x 100 mm
  • Conforms to standards both in office and industrial environments:
    • Increased noise immunity for industrial areas
    • Stricter noise emission for residential and commercial areas

Background information:

W&T Interfaces or Com-Servers are frequently used with a 24V power supply in large numbers at a central location. In such cases a common supply for the interfaces makes the application significantly clearer than would be the case when powering the devices with individual dedicated power supplies.

If there is no 24V power supply already in the installation, this problem can be elegantly and cost-effectively solved using the 24W DIN rail power supply model 11084, which is capable of powering multiple interfaces or COM servers all at once.

The power supply can of course also be used where in addition to the 24V supply for the W&T Interface you also need power for the rest of the installation. In this case you simply need to ensure that the power consumed does not exceed the rated power of the DIN rail power supply.

Thanks to the generous operating temperature range, the DIN rail mount power supply is also ideal for applications where the standard plug-in power supply provided with the Interfaces cannot be used due to the expected high ambient temperatures.


Technical data

  • Output power:
    • max. 24W
  • Efficiency:
    • typ. 84%
  • Input voltage:
    • 85..264VAC, 120..370VDC
  • Frequency:
    • 47..63 Hz
  • Input current:
    • 0.35A at 230 V AC
  • Inrush:
    • max. 40A at 230V AC
  • No-load losses:
    • <0.75W
  • LPS:
    • Yes
  • Output voltage:
    • 24V DC (adjustable 21.6..26.4V)
  • Tolerance:
    • +/-1%
  • Ripple:
    • max. 150mV
  • Rated current:
    • 1.0A
  • Minimum load:
    • none
  • Overcurrent limiter:
    • at 105%...160% of the nominal current
  • Short circuit protected:
    • Yes
  • Overvoltage protection:
    • Shutdown at 27.6..32.4V
    • Reset using POWER ON
  • Start time:
    • 500ms at rated load and 230V AC
  • Rise time:
    • 30ms at nominal load and 230V AC
  • Voltage bridging:
    • 50ms at rated load and 230V AC
  • Cooling:
    • Convection cooling
  • Dielectric strength:
    • In-Out: 3KV AC
  • Isolation resistance:
    • In-Out: 100 MOhm at 500VDC
  • Operating temperature:
    • -20..70°C, reduction factor
    • between 50..70°C
  • Storage temperature:
    • -40..85°C
  • Relative humidity:
    • Operating: 20..90% relative humidity
    • Storage: 10..95% relative humidity
    • (non-condensing)
  • Connections:
    • 3-pin input, 2-pin output
    • with screw terminals
  • MTBF:
    • >236,900 hours (per MIL-HDBK-217F at 25° C)
  • Weight:
    • 190 g
  • Dimensions:
    • 22.5 x 90 x 100 mm
  • Approvals:
    • UL, c-UL, TÜV, CB, CE
  • Safety:
    • Meets
    • UL 60950-1 / EN60950-1
  • EMC:
    • Meets
    • EN 55022 B
    • EN 61000-3-2, EN 61000-3-3
    • EN 61000-4-2, EN 61000-4-3
    • EN 61000-4-4, EN 61000-4-5
    • EN 61000-4-6, EN 61000-4-8
    • EN 61000-4-11, ENV 50204
    • EN 61204-3, EN 61000-6-1
Up