Background information: "Low Profile" PCI cards have the same electrical properties as their counterparts in standard PCI format. Only the height of the cards is significantly reduced compared with the original size and thus allows the cards to be installed in smaller PCs being offered today. An additional slot bracket of normal size is included for installing Low Profile cards in standard housings.
Additional interface modules are connected to the interface card using 2mm flat ribbon cable and attached to a slot in the PC case. Both components can be ordered as a separate accessory under article number 13014 for the Low-Profile housing and article number 13013 for the Standard housing.
Technical data:
Number of ports:
1 galvanically isolated RS232/RS422/RS485 port 3 non-isolated TTL interfaces
Operating modes:
RS422 RS485 2/4 wire with handshake control RS485 2/4 wire with automatic control
Switching time:
approx. 10µs for switching from data send to receive for RS485 automatic control (can be changed on request)
UART:
16950 with 128-byte FIFO
Base addresses:
automatic configuration
Interrupts:
automatic configuration
Baud rate:
50 ..460.800 Baud
Data format:
any format
Signals:
RxD A/B, TxD A/B, CTS A/B, DTR A/B
Serial connection:
9-pin SUB-D adapter
Galvanic isolation:
Isolation voltage min. 1 KV DC between PC and serial port 1
Power supply:
+5V 0.2A
Ambient temperature:
Storage: -40..+70°C, Operation: 0..+70°C
Permissible relative humidity:
0..95% RH (non-condensing)
Dimensions:
122 x 64 mm
Weight:
approx. 110 g
Delivery:
PCI card 1x RS232/422/485 Slot bracket in standard size Driver CD
