Data sheet:
RS232 Portable Buffer, 4 MB
Article no.: 88641
Unfortunately, this article is no longer available.
Storage and transfer of machine data
Properties
General information:
- Non-volatile buffering of serial data:
- Print and plot data
- Telephone fee information
- Machine data
- etc...
- Conversion of baud rate, data format and handshake protocol possible
- Addition of RS422, RS485 or 20mA interface modules available on request
- Integrated diagnostic and startup aid: Setting dump
- Conforms to standards both in office and industrial environments:
- High noise resistance per EN 61000-6-2
- Low noise emission per EN 55032:2015 + A1 Cl. B, EN 61000-3-2 & EN 61000-3-3
Application example "Transport of serial machine data":
It’s not always possible to connect a computer and the machine to be loaded with data using a serial data cable. Likewise, data transfer via diskette, CD or USB memory stick is often impractical (due to incompatibility or because a device does not have the appropriate terminal) or undesired (due to virus transmission). In these cases the RS232 Portable Buffer can be used as a transport medium - almost like a "memory stick" with RS232 interface.
Technical data
- Serial ports:
- 1x RS232
- RS232 port:
- 9-pin SUB-D connector
- with DTE configuration
- Supported signals:
- RxD, TxD, CTS, RTS, DTR
- Baud rate:
- 150..115,200 baud
- Data format:
- 7,8 data bits, no,even,odd parity
- Flow control:
- Hardware handshake or
- XON/XOFF protocol
- Integrated buffer:
- 4MB flash memory
- Power supply:
- Included AC adapter or other
- potential-free voltage 12..24V AC/DC
- Current consumption:
- typ. 30 mA at 24V DC
- Ambient temperature:
- Storage: -40..+70°C, Operation: 0..+60°C
- Permissible relative humidity:
- 0..95% RH (non-condensing)
- Housing:
- Plastic housing, 105 x 75 x 45mm
- Weight:
- approx. 150g
- Scope of delivery:
- 1x RS232 Portable Buffer, 4 MB