Power supply for DIN rail, 12V / 5.0A DC

Properties

General information:

• High efficiency: typ. 86%
• Limited Power Source (LPS)
• Potential-free "Power Good" contact
• Generous operating temperature range: -20..+70 degrees Celsius
• Compact DIN rail housing: 40 x 90 x 100 mm

Standards & more

• Conforms to standards both in office and industrial environments:
  • High noise resistance per EN 61000-6-2
  • Low noise emission per EN 55032:2015 + A1 Cl. B, EN 61000-3-2 & EN 61000-3-3

Background information:

Often a combination of W&T interfaces or Com-Servers together with other 12V consumers is used at a central location.

In such cases a common power supply for the interfaces and the peripherals makes the application much more organized than would be the case powering the devices with their own individual power supplies.

This assignment is handled elegantly and cost-effectively with the 60W DIN rail mount power supply model 11086, which can power multiple interfaces or Com-Servers and the connected peripherals centrally.

All you need to ensure is that the total power consumed does not exceed the capability of the DIN rail power supply.

Thanks to the generous operating temperature range, the DIN rail mount power supply is also ideal for applications where the standard plug-in power supply provided with the Interfaces cannot be used due to the expected high ambient temperatures.

Technical data

• Output power:
  • max. 60W
• Efficiency:
  • typ. 86%

• Input voltage:
  • 85..264VAC, 120..370VDC
• Frequency:
  • 47..63 Hz
• Input current:
  • 1A at 230V AC
• Inrush:
  • max. 60A at 230V AC
• No-load losses:
  • <0.75W
• LPS:
  • Yes

• Output voltage:
  • 12V DC (selectable 12..15V)
• Tolerance:
  • +/-1%
• Ripple:
  • max. 120mV
• Rated current:
  • 5A
• Minimum load:
  • none

• Overcurrent limiter:
  • at 105%..150% of rated current
• Short circuit protected:
  • Yes
• Overvoltage protection:
  • Shutdown at 15.6..18V
  • Reset using POWER ON

• Start time:
  • 500ms at rated load and 230V AC
• Rise time:
  • 30ms at nominal load and 230V AC
• Voltage bridging:
  • 50ms at rated load and 230V AC

• Cooling:
  • Convection cooling
• Dielectric strength:
  • In-Out: 3KV AC
• Isolation resistance:
  • In-Out: 100 MOhm at 500VDC

• Operating temperature:
  • -20..70°C, reduction factor
  • between 60..70°C
• Storage temperature:
  • -40..85°C
• Relative humidity:
  • Operating: 20..90% relative humidity
  • Storage: 10..95% relative humidity
  • (non-condensing)

• Connections:
  • 3-pin input, 4-pin output
  • with screw terminals
• MTBF:
  • >299,200 hours (per MIL-HDBK-217F at 25° C)
• Merchandise:
  • 2-year manufacturer’s guarantee

• Weight:
  • 330 g
• Dimensions:
  • 40 x 90 x 100 mm

• Approvals:
  • UL, c-UL, TÜV, CB, CE
• Safety:
  • Meets
  • UL 60950-1 / EN 60950-1
  • EN 62368-1
• EMC:
  • Meets
  • EN 55022 B
  • EN 61000-3-2, EN 61000-3-3
  • EN 61000-4-2, EN 61000-4-3
  • EN 61000-4-4, EN 61000-4-5
  • EN 61000-4-6, EN 61000-4-8
  • EN 61000-4-11, ENV 50204
  • EN 61204-3, EN 61000-6-1

• Manufacturer:
  • MEAN WELL Enterprises Co., Ltd.
• Power supply type:
  • MDR-60-12