Low Profile PCI card 1x 20mA, 1kV isolated
An additional TTY port for compact PCs
The 13410 PC Card adds a 20mA port with galvanic isolation to your PC. The additional TTL ports allow any three non-isolated serial ports to be implemented.
Properties
Interfaces:
- 1x 20mA interface
- 3x serial TTL interfaces without galvanic isolation
- usable with W&T interface modules as RS232, RS422, RS485 or 20mA interfaces
- 1x 32-bit PCI bus
- for 5V PCI systems
- Galvanic isolation between PC and Port 1
- Isolation voltage 1kV
Management and connectivity:
- Compact size makes it easy to use even in Low Profile systems
- 4 x UART 16950 with 128-byte FIFO
- Plug-and-play: automatic configuration of base address and interrupt
-
Driver support for:
- Windows Desktop: NT, 2000, XP, Vista, 7, 8, 10, 11
- Windows Server: 2003, 2008, 2008R2, 2012, 2016, 2019, 2022
- Linux: Ubuntu, Suse, Debian, .....
Standards & more
- Conforms to standards both in office and industrial environments:
- High noise resistance per EN 61000-6-2
- Low noise emission per EN 55032:2015 + A1 Cl. B, EN 61000-3-2 & EN 61000-3-3
- 5 year guarantee
Worth knowing
"Low Profile" PCI cards have the same electrical properties as their counterparts in standard PCI format. Only the height of the cards is significantly reduced compared with the original size and thus allows the cards to be installed in smaller PCs. An additional slot bracket of normal size is included for installing Low Profile cards in standard housings.
Additional interface modules are connected to the interface card using flat ribbon cable and attached to a slot in the PC case. Both components can be ordered as a separate accessory for Low-Profile housing and for standard housing.
Technical data
Connections and displays:
- System bus:
- 32-bit PCI-BUS / 33MHz / for 5V PCI systems
- Serial port:
- 1x 20mA interface
- 9-pin SUB-D adapter
- 3x non-isolated serial TTL ports
- 12-pin header with 2mm spacing
- Operating modes:
- 20mA selectable active/passive mode
- Maximum baud rate:
- 57600 baud
- Data format:
- any format
- Signals:
- RxD, TxD+
- UART:
- 16950 with 128-byte FIFO
- Galvanic isolation:
- Isolation voltage min. 1kV DC
- between PC and serial port 1
- Supply voltage:
- 5V DC
- Current consumption:
- typ. 200mA
Housing and other data:
- Dimensions:
- 134 x 80mm (W x H)
- Enclosure rating:
- IP00
- Weight:
- approx. 90g
- Ambient temperature:
- Storage: -40..+70°C
- Operating: 0..+70°C
- Permissible relative humidity:
- 5..95% RH, non-condensing
- Scope of delivery:
- Low Profile PCI card, 1x 20mA
- slot bracket in standard size
- Quick start manual
* Our offering is intended only for commercial users. We will be happy to refer private end customers to trading partners through whom our products can be purchased.