W&T connects
Interfaces for TCP/IP, Ethernet, RS-232, RS-485, USB, 20mA, glass and plastic fiber optic cable, http, SNMP, OPC, Modbus TCP, I/O digital, I/O analog, ISA, PCI
Firmware:

USB-Server Gigabit

Model 53662


Current firmware
Date Changes and comments Revision
July 8, 2019
  • Optimized: Finding devices using WuTility
  • Optimized: Changing the IP address using WuTility
  • Optimized: System response improved
The current configuration of the USB-Server is not affected by a firmware upgrade.
1.44
ZIP Download
 Show older firmware...
Hide older firmware...
Older firmware
Date Changes and comments Revision
August 10, 2018
  • Optimized: System response improved
  • Fixed: DHCP client lease time was not correctly processed
  • Fixed: DHCP gateway was not correctly displayed
  • Fixed: Display of devices with HTTPS enabled
  • Optimized: Factory default behavior
  • Optimized: Locating USB servers behind routers
The current configuration of the USB-Server is not affected by a firmware upgrade.
1.29
auf Anfrage
May 16, 2018
  • Optimized: System response improved
  • Optimized: Bulk transfer accelerated
The current configuration of the USB-Server is not affected by a firmware upgrade.
1.27
auf Anfrage
April 20, 2017
  • Optimized: System response improved
  • New: Certificate chains can be used
  • Optimized: Handling of certificates
  • Fixed: Problems with logo uploading
The current configuration of the USB-Server is not affected by a firmware upgrade.
1.24
ZIP Download
July 19, 2016
  • Optimized: System response improved
The current configuration of the USB-Server is not affected by a firmware upgrade.
1.23
auf Anfrage
June 28, 2016
  • Optimized: System response improved
  • Fixed: Error in Clear-Stall URB
  • Fixed: DNS settings of DHCP server
  • Optimized: Config up-/download
  • Optimized: SSL certificate upload
The current configuration of the USB-Server is not affected by a firmware upgrade.
1.22
auf Anfrage
January 4, 2016
  • Fixed: USB autosuspend turned off
  • Optimized: System response improved
The current configuration of the USB-Server is not affected by a firmware upgrade.
1.15
auf Anfrage
November 2, 2015
  • Corrected: Errors in network buffer
  • Optimized: Data throughput in RAM
The current configuration of the USB-Server is not affected by a firmware upgrade.
1.14
auf Anfrage
October 14, 2015
  • Corrected: Minor problems with DHCP
  • Optimized: USB devices with interface numbers not in sequence are supported
The current configuration of the USB-Server is not affected by a firmware upgrade.
1.13
auf Anfrage
August 28, 2015
  • Optimized: Device detection improved
  • New: USB devices without Interface 0 supported
The current configuration of the USB-Server is not affected by a firmware upgrade.
1.12
auf Anfrage
August 4, 2015
  • Corrected: TCP data could be delayed by up to 200ms.
  • Corrected: USB autosuspend was not turned off
The current configuration of the USB-Server is not affected by a firmware upgrade.
1.11
auf Anfrage
June 18, 2015
  • Internal improvements
  • Various minor bugfixes
The current configuration of the USB-Server is not affected by a firmware upgrade.
1.10
auf Anfrage
April 28, 2015
  • Corrected: Incorporating multiple devices at the same time
  • Optimized: USB PowerOn delayed by 800 ms
  • Various minor bugfixes
The current configuration of the USB-Server is not affected by a firmware upgrade.
1.09
auf Anfrage
March 12, 2015
  • NEW: Freely editable descriptions for USB ports
  • Dynamic handling of the MaxPacketSize for isochronal pipes
  • Various minor bugfixes
The current configuration of the USB-Server is not affected by a firmware upgrade.
1.08
auf Anfrage
February 12, 2015
  • First version
1.07
auf Anfrage
Hide older firmware...

Up