Ethernet network extender
More network range with 2-wire
SPE network extender
Article no.: 55608
-
Bridging long distances with Plug’n’Play
-
You activate the video function using the following button. By clicking on it, you consent to YouTube (Google) receiving data.
-
Extend Ethernet networks by 1000 m and more
-
With the Network Extender, you can bridge long distances between network participants. These can be cameras and other monitoring devices, production lines and manufacturing machines, and any conceivable Ethernet device in building technology and industry. Depending on the cable used, you can achieve a maximum extension of 1000 m with one set, but several sets can also be connected in series, so that even longer distances can be bridged.
-
The full 1000m extension for the data line is available using a single pair Ethernet cable (without PoDL). However, the Network Extender Set works with any two-wire cable, shielded to minimize susceptibility to interference. Existing cables such as fieldbus cable, NYM-J cable or even bell wire can therefore be used. Multi-core cables from your existing cabling can also be connected, whereby only two of the existing wires are used.
Use existing lines - for example:
-
- Coaxial cable
- Patch cable
- Fieldbus cable
- NYM-J cable
- Bell wire
- Single Pair Ethernet
- Other shielded 2-wire or multi-wire cables
Single pair Ethernet or other twisted pair cables
-
- SPE and other two-wire enables data transmission up to 1000 m
- Use of existing cabling saves costs and installation effort
- Fieldbus cable
- Plug’n’Play without configuration effort
- Data transmission 10BaseTE Full Duplex
Plug’n’Play with Ethernet <> SPE interface
The network extender set consists of two Ethernet <> Single Pair Ethernet converters. These form the interfaces at which Ethernet signals are converted to SPE and back to Ethernet without you having to worry about it. This allows you to start operation immediately after plugging in the network cable - no additional configuration needed
Can I also use a repeater?
Ethernet repeaters can also be used to extend Ethernet networks. However, the extension is limited to the maximum length of Ethernet cables, which is around 100 meters. To achieve an extension of 1000 m, around 10 repeaters plus cable would have to be purchased and installed, which would be considerably more cost-intensive, complex and error-prone
All the advantages of the network extender at a glance
Any questions about the Network Extender?
Mr. Gerdes will be happy to help you.
Phone: +49 202/2680-110 (Mon.-Fri. 8 a.m. to 5 p.m.)
E-mail: j.gerdes@wut.de
Order a sample
Commercial customers can request samples of all products from W&T. If the sample is returned within 30 days, you only pay the return costs. If you would like to keep the test device, simply pay the enclosed invoice.
Order a sample now!Personal support
Not sure whether the Network Extender SPE is right for your application? Or do you have questions about commissioning, installation or use? Our team of technicians is there for you personally on weekdays from 8 am to 5 pm!
Phone: +49 202/2680-110 (Mon.-Fri. 8 a.m. to 5 p.m.)