Web-IO Digital

Active search for Web-IO products, Com-Servers and other W&T network components in the local subnet and display of all important information at a glance. Initial assignment of IP addresses, copying of entire configuration blocks, uploading of firmware updates and direct telnet access are some of the additional functions.

Integrate temperatures, door contacts or other displaced I/O points into your network management system. Beyond this, it is also possible to perform the configuration via SNMP.

Enables access to the IOs through TCP/UDP sockets (ASCII and binary), HTTP requests, REST, Modbus TCP and SNMP

Android and iOS app for all Web-IO Digital, Web-IO Analog and Web-Thermographs

more information...

Connect a Com-Server to the network, set up a virtual COM port on your system and your serial application is network-enabled - without programming a single line.

Nearly every display system supports OPC and hence also the integration of Web-IOs and Com-Servers.

Universal Modbus-TCP client with free selection of function nodes and register addresses.

With this little tool you can for example switch an output on a Web-IO Digital. The following parameters are used for invoking:

setoutput ip=IP-Address output=Output-No state=ON/OFF/TOGGLE pwd=Password port=HTTP-Port.

Example: setoutput ip=192.168.178.46 output=5 state=ON switches Output 5 on Web-IO 192.168.178.46 to ON.

With Web-IO 4.0 products the Web-API must be enabled under communication paths and the outputs used must enabled for switching

Introduction to programming of technical websites using HTML, JavaScript, AJAX including PHP

Simple application for opening a connection to the W&T Com-Server and receiving data from or sending data to it through the serial port.

TCP server for sending and receiving data

Simple application for accepting a connection from a W&T Com-Server in Client Mode and receiving data from or sending data to it through the serial port.

Simple application for accepting connections from multiple W&T devices and displaying the received data there (e.g. for alarm messages from Web-IO Digital and Web-Thermograph devices).

Simple application for exchanging datagrams with a W&T Com-Server or receiving UDP alarm messages from Web-IO Digital and Web-Thermograph devices.

Simple example for using the BoxControl structure of the W&T Com-Server.

Simple terminal program for W&T Com-Server incl. configuration option for serial interface.

With this application you can read and store fee data from a W&T fee data buffer using a W&T Com-Server. This application can also be started via batch job by including the IP address and file name.

Simple application for controlling and monitoring the IOs on a Web-IO Digital 2xIn, 2xOut by exchanging command strings.

Simple application for controlling and monitoring the IOs on a Web-IO Digital 12xIn, 12xOut by exchanging command strings.

Simple application for accepting a connection from a Web-IO Digital 12xIn, 12xOut in client mode and controlling and monitoring the IOs by exchanging command strings.

Simple application for controlling and monitoring the IOs on a Web-IO Digital 12xIn, 12xOut by exchanging UDP datagrams using command strings.

Simple application for controlling and monitoring the IOs on a Web-IO Digital 12xIn, 12xOut by exchanging binary structures.

Simple application for controlling and monitoring the IOs on a Web-IO Digital 12xIn, 12xOut by exchanging UDP datagrams using binary structures.

Simple application for opening a connection to the W&T Com-Server and receiving data from or sending data to it through the serial port.

Simple application for accepting a connection from a W&T Com-Server in Client Mode and receiving data from or sending data to it through the serial port.

Simple application for accepting connections from multiple W&T devices and displaying the received data there (e.g. for alarm messages from Web-IO Digital and Web-Thermograph devices).

Simple application for exchanging datagrams with a W&T Com-Server or receiving UDP alarm messages from Web-IO Digital and Web-Thermograph devices.

Simple example for using the BoxControl structure of the W&T Com-Server.

Simple terminal program for W&T Com-Server incl. configuration option for serial interface.

With this application you can read and store fee data from a W&T fee data buffer using a W&T Com-Server. This application can also be started via batch job by including the IP address and file name.

Simple application for controlling and monitoring the IOs on a Web-IO Digital 2xIn, 2xOut by exchanging command strings.

Simple application for controlling and monitoring the IOs on a Web-IO Digital 12xIn, 12xOut by exchanging command strings.

Simple application for accepting a connection from a Web-IO Digital 12xIn, 12xOut in client mode and controlling and monitoring the IOs by exchanging command strings.

Simple application for controlling and monitoring the IOs on a Web-IO Digital 12xIn, 12xOut by exchanging UDP datagrams using command strings.

Simple application for controlling and monitoring the IOs on a Web-IO Digital 12xIn, 12xOut by exchanging binary structures.

Simple application for controlling and monitoring the IOs on a Web-IO Digital 12xIn, 12xOut by exchanging UDP datagrams using binary structures.

Simple application for opening a connection to the W&T Com-Server and receiving data from or sending data to it through the serial port.

Simple application for accepting a connection from a W&T Com-Server in Client Mode and receiving data from or sending data to it through the serial port.

Simple application for accepting connections from multiple W&T devices and displaying the received data there (e.g. for alarm messages from Web-IO Digital and Web-Thermograph devices).

Simple example for using the BoxControl structure of the W&T Com-Server.

Simple terminal program for W&T Com-Server incl. configuration option for serial interface.

With this application you can read and store fee data from a W&T fee data buffer using a W&T Com-Server. This application can also be started via batch job by including the IP address and file name.

Simple application for controlling and monitoring the IOs on a Web-IO Digital 2xIn, 2xOut by exchanging command strings.

Simple application for controlling and monitoring the IOs on a Web-IO Digital 12xIn, 12xOut by exchanging command strings.

Simple application for accepting a connection from a Web-IO Digital 12xIn, 12xOut in client mode and controlling and monitoring the IOs by exchanging command strings.

Simple application for controlling and monitoring the IOs on a Web-IO Digital 12xIn, 12xOut by exchanging binary structures.

Simple application for controlling and monitoring the IOs on a Web-IO Digital 12xIn, 12xOut by exchanging UDP datagrams using binary structures.

Simple application for opening a connection to the W&T Com-Server and receiving data from or sending data to it through the serial port.

Simple application for accepting a connection from a W&T Com-Server in Client Mode and receiving data from or sending data to it through the serial port.

Simple application for accepting connections from multiple W&T devices and displaying the received data there (e.g. for alarm messages from Web-IO Digital and Web-Thermograph devices).

Simple application for exchanging datagrams with a W&T Com-Server or receiving UDP alarm messages from Web-IO Digital and Web-Thermograph devices.

Simple example for using the BoxControl structure of the W&T Com-Server.

Simple terminal program for W&T Com-Server incl. configuration option for serial interface.

With this application you can read and store fee data from a W&T fee data buffer using a W&T Com-Server. This application can also be started via batch job by including the IP address and file name.

Simple application for controlling and monitoring the IOs on a Web-IO Digital 2xIn, 2xOut by exchanging command strings.

Simple application for controlling and monitoring the IOs on a Web-IO Digital 12xIn, 12xOut by exchanging command strings.

Simple application for accepting a connection from a Web-IO Digital 12xIn, 12xOut in client mode and controlling and monitoring the IOs by exchanging command strings.

Simple application for controlling and monitoring the IOs on a Web-IO Digital 12xIn, 12xOut by exchanging UDP datagrams using command strings.

Simple application for controlling and monitoring the IOs on a Web-IO Digital 12xIn, 12xOut by exchanging binary structures.

Simple application for controlling and monitoring the IOs on a Web-IO Digital 12xIn, 12xOut by exchanging UDP datagrams using binary structures.

Simple application for opening a connection to the W&T Com-Server and receiving data from or sending data to it through the serial port.

Simple application for accepting a connection from a W&T Com-Server in Client Mode and receiving data from or sending data to it through the serial port.

Simple application for accepting connections from multiple W&T devices and displaying the received data there (e.g. for alarm messages from Web-IO Digital and Web-Thermograph devices).

Simple application for exchanging datagrams with a W&T Com-Server or receiving UDP alarm messages from Web-IO Digital and Web-Thermograph devices.

Simple example for using the BoxControl structure of the W&T Com-Server.

Simple terminal program for W&T Com-Server incl. configuration option for serial interface.

With this application you can read and store fee data from a W&T fee data buffer using a W&T Com-Server. This application can also be started via batch job by including the IP address and file name.

Simple application for controlling and monitoring the IOs on a Web-IO Digital 2xIn, 2xOut by exchanging command strings.

Simple application for controlling and monitoring the IOs on a Web-IO Digital 12xIn, 12xOut by exchanging command strings.

Simple application for accepting a connection from a Web-IO Digital 12xIn, 12xOut in client mode and controlling and monitoring the IOs by exchanging command strings.

Simple application for controlling and monitoring the IOs on a Web-IO Digital 12xIn, 12xOut by exchanging UDP datagrams using command strings.

Simple application for controlling and monitoring the IOs on a Web-IO Digital 12xIn, 12xOut by exchanging binary structures.

Simple application for controlling and monitoring the IOs on a Web-IO Digital 12xIn, 12xOut by exchanging UDP datagrams using binary structures.

Simple application for opening a connection to the W&T Com-Server and receiving data from or sending data to it through the serial port.

Simple application for accepting a connection from a W&T Com-Server in Client Mode and receiving data from or sending data to it through the serial port.

Simple application for accepting connections from multiple W&T devices and displaying the received data there (e.g. for alarm messages from Web-IO Digital and Web-Thermograph devices).

Simple application for exchanging datagrams with a W&T Com-Server or receiving UDP alarm messages from Web-IO Digital and Web-Thermograph devices.

Simple application for controlling and monitoring the IOs on a Web-IO Digital 12xIn, 12xOut by exchanging command strings.

Simple application for accepting a connection from a Web-IO Digital 12xIn, 12xOut in client mode and controlling and monitoring the IOs by exchanging command strings.

Simple application for controlling and monitoring the IOs on a Web-IO Digital 12xIn, 12xOut by exchanging UDP datagrams using command strings.

Simple application for controlling and monitoring the IOs on a Web-IO Digital 12xIn, 12xOut by exchanging binary structures.

Simple script for controlling and monitoring the IOs on a Web-IO Digital 2xIn, 2xOut by exchanging command strings.

Simple application for controlling and monitoring the IOs on a Web-IO Digital 2xIn, 2xOut by exchanging command strings.

Simple application for controlling and monitoring the IOs on a Web-IO Digital 2xIn, 2xOut by exchanging command strings.

Simple application for controlling and monitoring the IOs on a Web-IO Digital 2xIn, 2xOut by exchanging command strings.