W&T connects
Interfaces for TCP/IP, Ethernet, RS-232, RS-485, USB, 20mA, glass and plastic fiber optic cable, http, SNMP, OPC, Modbus TCP, I/O digital, I/O analog, ISA, PCI
Firmware:

Web-IO 4.0 Analog 0-20mA

Model 57761


Current firmware
Date Changes and comments Revision
August 9, 2022
  • Error fixed: Turning on the OPC UA caused permanent reset which could only be resolved by a factory reset.
  • Security: Eliminating the outdated protocols TLS 1.0 and 1.1. Effective immediately only TLS 1.2 is supported.
1.59
ZIP download
 Show older firmware...
Hide older firmware...
Older firmware
Date Changes and comments Revision
July 12, 2022
  • File upload optimized
1.58
ZIP download
May 4, 2022
  • New: Configure measurement value compensation with up to 10 correction points per sensor via JSON file.
  • Firmware update: Initiating via button in the interface possible
1.57
ZIP download
March 2, 2022
  • New: Configurable NodeIDs for OPC-UA
  • MQTT: Retain flags revised
1.55
ZIP download
January 20, 2022
  • HTTPS - Chunked transfer revised
  • SSL/TLS - Certificate upload now possible again
  • DHCP - IP assignment with DHCP relays adapted
  • Boot sector - Emergency access when firmware update is interrupted now revised
1.54
ZIP download
December 16, 2021
  • Security updates: DHCP, DNS and ICMP services revised
  • Error in SNMP output corrected
  • Erroneous output in MQTT corrected
1.53
ZIP download
August 5, 2021
  • Problem fixed: Wrong time stamp was entered for the first value in the data logger.
1.51
ZIP download
June 22, 2021
  • Problems in SNMPv2/3 MIB tree fixed
  • Problems in cloud communication fixed
1.50
ZIP download
May 25, 2021
  • Error fixed: SNMP output with different decimal points
  • Measuring module software updated and restart improved
1.49
ZIP download
May 3, 2021
  • New: OPC UA support
  • New: Uploading of your own certificates
  • New: Subsequent delivery of historical data via MQTT
  • Error messages for MQTT connections added
  • Web-API polling revised
  • Web server error messages optimized
  • HTTP processing revised
  • REST connections revised
  • Security updates
1.48
ZIP download
November 4, 2020
  • Error fixed: MQTT subscribe message could fail
  • Error fixed: Some activation checkboxes indicated a malfunction
  • Uploading of long configuration files optimized
1.47
ZIP download
September 15, 2020
  • Error fixed: When uploading the configuration file to the device SNMP passwords were not accepted
  • Automatic monitoring for measuring module failure added
  • Firmware update for measuring module revised
1.46
ZIP download
August 17, 2020
  • TLS: Problems with TLS handshake fixed
  • Factory default reset could fail
1.45
ZIP download
July 21, 2020
  • TLS: Support of TLS 1.2
  • Server authentication revised
  • Character coding for HTTP request message corrected
  • Detection of incomplete OPC requests implemented
  • SNMP index error when generating dynamic names corrected
  • System start optimized
  • Up-Time control for the measuring model added
  • Assignment of the device error list revised
1.44
ZIP download
June 8, 2020
  • Problem fixed: Level peak after device restart reduced
  • Problem fixed: Module reset after firmware update was not performed
1.41
ZIP download
March 2, 2020
  • New: Number of decimal places configurable
  • Problem in OPC communication fixed
  • Problem with SNMP name indexing fixed
1.40
ZIP download
January 31, 2020
  • Network stack optimized
  • Diagnostics list corrected
  • Configuration upload accelerated
  • Addition of SSL for MQTT connections
  • MQTT Client-ID now freely configurable
  • authentication mechanism stabilized
  • OPC communication optimized
  • DHCP functionality stabilized
  • Problem fixed: Error in device interface
  • Problem fixed: Error in SNMPv3 authentication
  • Problem fixed: Error in timed alarms when time is entered manually
  • Problem fixed: Error in MQTT authentication
1.39
ZIP download
November 28, 2019
  • Problem fixed: Value difference message didn’t function
  • Problem fixed: Zoom error in visualization
  • Problem fixed: Cloud output with deselected sensors failed
  • Send interval for UDP peer added
1.36
ZIP download
September 30, 2019
  • MQTT topics may now contain W&T tags
  • Passwords can now be set by uploading the configuration file.
  • Output control improved
  • Problem in SNMPv3 could have caused a "NotInTimeWindow" error.
  • Problem with REST Digest Authentication fixed.
1.35
ZIP download
August 6, 2019
  • Problems with factory default reset fixed.
  • Problems with MQTT ping interval fixed.
  • Problem fixed: MQTT Retain Flag was sometimes not set.
  • Problem fixed: Alarm Clear message with an Index > 12 alarms was incorrectly sent.
  • Problems with SNMPv3 module type detection fixed.
  • Possible problems with software reset fixed.
  • Possible calculation error with negative numbers fixed.
  • Possible log in problems when using certain mail server fixed.
  • Fall-back system for ensuring configuration integrity after firmware update improved.
  • MQTT standard paths added.
  • Device registration reserved only for the administrator user.
  • Explicit output release for SNMP added.
1.34
ZIP download
May 6, 2019
  • Fixed: Uploading of large configuration files failed.
  • Fixed: TCP client message was sometimes not initiated.
  • Fixed: Error in SSL stack eliminated.
  • Script components updated
1.32
ZIP download
March 26, 2019
  • New: Supports SNMPv2c and SNMPv3
  • Problem with zoom function fixed.
  • Fixed: No display of measurement values when using replaceable tags in HTTP request message.
  • Fixed: Units not output when sensor turned off.
  • Fixed: Restart after software reset was able to be interrupted.
  • Fixed: Measurement value transmission in binary mode was faulty.
  • Fixed: Port mode "AUTO" was not recognized in binary mode.
1.31
ZIP download
December 13, 2018
  • Cloud communication optimized.
  • FTP data output optimized.
  • WuTility inventorying problem fixed.
  • Problem fixed: Interval selection for data retention output was not accounted for.
  • Problem fixed: MQTT connection opening after closing the connection was not reinitiated.
  • Problem fixed: Value output in visualization failed if sensor names included special characters.
  • Web-API - Cross Origin Request can be configured.
  • Rest - Cross Origin Request can be configured.
1.30
ZIP download
September 7, 2018
  • Problem with cloud transfer fixed
1.28
ZIP download
August 30, 2018
  • Problem fixed: SNMP system messages were not sent.
1.27
ZIP download
August 9, 2018
  • Problem fixed: Improved performance for fast transmission of control commands
  • Problem fixed: Text fields for server addresses were too short for alphanumeric entries.
  • Problem fixed: Output watchdog was also enabled in Input mode
1.26
ZIP download
July 26, 2018
  • Problem fixed: Box-to-Box mode did not function
  • Problem fixed: Wrong character format for single value queries
  • New: Output watchdog sets a configurable value when there is inactivity
  • New: Status indicator for binary connections on the diagnostics side
1.25
ZIP download
June 25, 2018
  • Problem fixed: Visualization didn’t work when special characters were configured in the channel unit.
  • Problem fixed: Erroneous output of the logger.csv file corrected.
  • Problem fixed: Web page could not be opened in IE 11.
1.24
ZIP download
May 29, 2018
  • First firmware version
1.23
ZIP download
Hide older firmware...

Up