Com-Server chip card module, 10BT

Properties

Interfaces:

• 1x serial connection for the embedded system
  • Serial TTL level
  • RS485
• 1x Ethernet 10BaseT
• alternate hardware configuration
  • RS232 version (extra charge)

Management and connectivity:

• Remote configuration
  • Startup using WuTility (three clicks and you’re done), DHCP, serial
  • Telnet
  • Control sockets from your own applications
• Transparent communication
  • Windows COM Port Redirector and virtual COM ports
  • Box-to-Box
  • TCP server sockets from your own applications
  • OPC server
• Expanded protocol support
  • FTP client / server
  • Telnet client / server
  • UDP Peer
  • SLIP

Power supply:

• External power
  • Pin header 5V DC
  • Additional module for 24V/DC power supply

Standards & more

• Conforms to standards both in office and industrial environments:
  • High noise resistance per EN 61000-6-2
  • Low noise emission per EN 55032:2015 + A1 Cl. B, EN 61000-3-2 & EN 61000-3-3
• 5 year guarantee

Run modes

Windows COM Port Redirector

Install the COM Port Redirector and configure your serial program on one of the virtual COM ports - that’s all there is to it! Regardless of whether as a replacement for missing hardware COM ports, a solution for virtual environments like VMware, HyperV, etc., or as a simple line driver, you serial communication becomes network capable without a single line of programming. Multipoint mode and packaging options are of course also available here.
Data sheet with download link

Box-to-Box

In just a few clicks you can link 2 Com-Servers to each other logically and use an operating-system neutral, transparent and if desired TLS encrypted data tunnel through the network. Serial data are sent bi-directional and as fast as possible to the respective counterpart. Automatic reconnect functions in case of connection faults/dropouts are available as are multipoint operation and packeting options for fine tuning when using serial protocols.
To application example ...

TCP/UDP socket communication

Network programming today belongs to the standard repertoire of all programmers. Integrate your serial device simply into your own network application. Take as a TCP client control of the connection into your own hands, be contacted as a TCP server using event-driven control, or use the efficient, contactless UDP protocol. The new multipoint mode and packaging options are of course available here also.
To application example ...

FTP client/server

Send and archive your serial data with the FTP standard tools on most operating systems. Serial outputs from scales, barcode readers etc. or status and error messages for example from UPSs are classic applications for the use of Com-Servers as FTP server or FTP client.
To application example ...

Technical data

Connections and displays:

• Serial port:
  • 1x UART-TTL or RS485 port
  • Optional: RS232 module
  • 2mm, 12-pin adapter
  • 300 to 57,600 baud
  • 7,8 data bits
  • 1,2 stop bits
  • Parity No, Even, Odd
  • Flow control No, RTS/CTS, Xon/Xoff
• Serial modes:
  • RS485 4-wire bus master
  • RS485 4 wire with automatic control
  • RS485 2 wire with automatic control
• Network:
  • 10BaseT
  • RJ45
  • IPv6 on request
• Galvanic isolation:
  • min. 500 volts
• Power supply:
  • stab. 5V DC ±5%
  • optional: 24V DC
• Supply connection:
  • via one of the two pin headers
• Current consumption:
  • typically 200mA, max. 250mA @5V DC
• Displays:
  • 1 LED Status
  • 1 LED Error

Housing and other data:

• Housing:
  • -
• Enclosure rating:
  • IP00
• Dimensions:
  • 54 x 80 mm (L x W) (Technical drawing)
• Weight:
  • approx. 34g
• Ambient temperature:
  • Storage: -40..+70°C
  • Operating: 0..+70°C
• Permissible relative humidity:
  • 5..95% RH, non-condensing
• Scope of delivery:
  • 1x Com-Server Credit Card Module 10BT
  • 1x Quick Guide
  • 1x product CD with COM Port Redirector,
  • manual, German/English, etc.