Due to maintenance work, W&T will be closed on 19.04.2024!

You can reach our technical hotline at:
+49 202/2680-110 or under the emergency number: +49 179/4317651

On Monday 22.04.2024 we will be available as usual.

W&T connects
Interfaces for TCP/IP, Ethernet, RS-232, RS-485, USB, 20mA, glass and plastic fiber optic cable, http, SNMP, OPC, Modbus TCP, I/O digital, I/O analog, ISA, PCI
Firmware:

Com-Server 10BaseT, 5V

Model 58511

Current firmware
Date Changes and comments Revision
January 8, 2015
  • FTP server mode: Irregular connection closing by client allowed for
  • SNMP was deactivated after update to 1.71
The newest included version of WuTility must be used for sending this firmware!
The current configuration of the Com-Server is not affected by a firmware upgrade. Any subsequent reset of the Com-Server to the factory default setting does however activate the DHCP client. For details on DHCP operation and deactivating it where appropriate, refer to the current manual.
 1.72
ZIP download
 Show older firmware...Hide older firmware...
Older firmware
Date Changes and comments Revision
July 10, 2014
  • Box-to-Box: Dispatch Char in slave activated
  • SLIP mode optimized
  • DHCP: Optimized for high data load
The newest included version of WuTility must be used for sending this firmware!
The current configuration of the Com-Server is not affected by a firmware upgrade. Any subsequent reset of the Com-Server to the factory default setting does however activate the DHCP client. For details on DHCP operation and deactivating it where appropriate, refer to the current manual.
 1.71
ZIP download
January 24, 2011
  • Optimizing of firmware upload in noisy environments
The newest included version of WuTility must be used for sending this firmware! The current configuration of the Com-Server is not affected by a firmware upgrade. Any subsequent reset of the Com-Server to the factory default setting does however activate the DHCP client. For details on DHCP operation and deactivating it where appropriate, refer to the current manual.
 1.67
ZIP download
December 22, 2010
  • Support for fragmented UDP/IP packets
The current configuration of the Com-Server is not affected by a firmware upgrade. Any subsequent reset of the Com-Server to the factory default setting does however activate the DHCP client. For details on DHCP operation and deactivating it where appropriate, refer to the current manual.
 1.66
ZIP download
January 11, 2010
  • Keep-alive response in Box-to-Box mode modified
  • Minimum length of Ethernet frames adjusted
  • Reset behavior in DHCP mode revised
The current configuration of the Com-Server is no longer affected by a firmware upgrade. Any subsequent reset of the Com-Server to the factory default setting does however activate the DHCP client. For details on DHCP operation and deactivating it where appropriate, refer to the current manual.
 1.64
ZIP download
May 4, 2009
  • NEW: Serial input buffer configurable
  • Software handshake optimized
  • Optimized DHCP response after link interruption
  • SNMP correction incl. new MIB 1.23
The current configuration of the Com-Server is not affected by a firmware upgrade. Any subsequent reset of the Com-Server to the factory default setting does however activate the DHCP client. For details on DHCP operation and deactivating it where appropriate, refer to the current manual.

 1.62
ZIP download
December 13, 2007
  • Cyclical generation of GARP packets
  • Optimized saving of configuration files
The current configuration of the Com-Server is not affected by a firmware upgrade. Any subsequent reset of the Com-Server to the factory default setting does however activate the DHCP client. For details on DHCP operation and deactivating it where appropriate, refer to the current manual.

 1.58
ZIP download
November 28, 2006
  • Display in telnet menu corrected
The current configuration of the Com-Server is not affected by a firmware upgrade. Any subsequent reset of the Com-Server to the factory default setting does however activate the DHCP client. For details on DHCP operation and deactivating it where appropriate, refer to the current manual.

 1.53
ZIP download
November 8, 2006
  • NEW: DHCP protocol
  • NEW: DNS protocol
  • Configurable TCP port for the control port
  • RARP protocol revised
The current configuration of the Com-Server is not affected by a firmware upgrade. Any subsequent reset of the Com-Server to the factory default setting does however activate the DHCP client. For details on DHCP operation and deactivating it where appropriate, refer to the current manual.

 1.52
ZIP download
May 29, 2006
  • Expansion of the Serial Socket Protocol
  • Optimized configuration uploading
  • LED indication of the connection status corrected
 1.50
ZIP download
February 15, 2006
  • Compatible successor model to Com-Server 58211
 1.49
ZIP download
Hide older firmware...

Up