Wiesemann & Theis GmbH

Networking, sensors and interface technology for industry, office and IT

Data sheet:

Com-Server Highspeed 100BaseFX

1 serial port to the optical network

The Com-Server Highspeed 100BaseFX integrates a serial RS232/422/485 device into the optical network (SC connector) via TCP/IP Ethernet. Numerous network services are available for communication.

Properties

Interfaces:

  • 1x RS232/RS422/RS485 selectable
    • Custom-built modules on request
  • 1x Ethernet 100BaseFX, ST connector
    • Noise-immune network connection up to 2000 meters
    • Network-side galvanic isolation at nearly an desired amount
    • Alternatively with SC connector (multimode), see Com-Server Highspeed 100BaseLX
  • alternate hardware configuration
    • 20mA/TTY version (extra charge)

Management and connectivity:

  • Remote configuration
    • Startup using WuTility (three clicks and you’re done), DHCP, serial
    • Web-Based-Management
    • Telnet
    • Control sockets from your own applications
  • Transparent communication
    • Windows COM Port Redirector and virtual COM ports
    • Box-to-Box
    • TCP server sockets from your own applications
    • OPC server
  • Expanded protocol support
    • FTP client / server
    • Telnet client / server
    • UDP Peer
    • SLIP

Power supply:

  • External
    • Screw terminal connection 12V-48V AC/DC

Standards & more

  • Conforms to standards both in office and industrial environments:
    • High noise resistance per EN 61000-6-2
    • Low noise emission per EN 55032:2015 + A1 Cl. B, EN 61000-3-2 & EN 61000-3-3
  • 5 year guarantee

Run modes

Windows COM Port Redirector

Install the COM Port Redirector and configure your serial program on one of the virtual COM ports - that’s all there is to it! Regardless of whether as a replacement for missing hardware COM ports, a solution for virtual environments like VMware, HyperV, etc., or as a simple line driver, you serial communication becomes network capable without a single line of programming. Multipoint mode and packaging options are of course also available here.
Data sheet with download link

Box-to-Box

In just a few clicks you can link 2 Com-Servers to each other logically and use an operating-system neutral, transparent and if desired TLS encrypted data tunnel through the network. Serial data are sent bi-directional and as fast as possible to the respective counterpart. Automatic reconnect functions in case of connection faults/dropouts are available as are multipoint operation and packeting options for fine tuning when using serial protocols.
To application example ...

TCP/UDP socket communication

Network programming today belongs to the standard repertoire of all programmers. Integrate your serial device simply into your own network application. Take as a TCP client control of the connection into your own hands, be contacted as a TCP server using event-driven control, or use the efficient, contactless UDP protocol. The new multipoint mode and packaging options are of course available here also.
To application example ...

FTP client/server

Send and archive your serial data with the FTP standard tools on most operating systems. Serial outputs from scales, barcode readers etc. or status and error messages for example from UPSs are classic applications for the use of Com-Servers as FTP server or FTP client.
To application example ...


Technical data

Connections and displays:

  • Serial port:
    • 1x RS232-, RS422-, RS485 port, selectable
    • Optional: 20mA/TTY (extra cost)
    • DB9 connector plug
    • 50 to 230.400 baud
    • 7,8 data bits
    • 1,2 stop bits
    • Parity No, Even, Odd
    • Flow control No, RTS/CTS, Xon/Xoff
  • Serial modes:
    • RS232
    • RS422 4-wire bus master
    • RS485 4-wire bus master
    • RS485 4 wire with automatic control
    • RS485 2 wire with automatic control
  • Network:
  • Fiber optic medium:
    • Duplex Multimode fiber optics 50/125µm or 62.5/125µm
  • Wavelength:
    • 1310nm
  • Optical budget:
    • 50/125µm max. 7dB
    • 62.5/125µm max. 10dB
  • Galvanic isolation:
    • virtually infinite (fiber optic)
  • Supply voltage:
    • DC 12V .. 48V (+/-10%)
    • AC 18Veff .. 30Veff (+/-10%)
  • Supply connection:
    • Plug-in screw terminal, 5.08mm spacing
    • Labeled "L+" and "M"
  • Current consumption:
    • typ. 110mA @24V DC
  • Displays:
    • 1 LED Power
    • 1 LED Status
    • 1 LED Error

Housing and other data:

  • Housing:
    • Plastic compact housing for top-hat rail mount
    • 105x45x75mm (l x w x h)
  • Enclosure rating:
    • IP20
  • Weight:
    • approx. 181g
  • Ambient temperature:
    • Storage: -40..+70°C
    • Operating, non-contiguous: 0..+55°C (+70°C on request)
  • Permissible relative humidity:
    • 5..95% RH, non-condensing
  • Scope of delivery:
    • 1x Com-Server Highspeed 100BaseFX
    • 1x Quick Guide

Accessories

*Net unit price for
commercial users
  • Power supplies

    • Plug-in power supply, 24V / 500mA DC with Euro plug
    • 11021
    • 21.00€
    • Plug-in Power Supply, 24V / 750mA DC with Euro, US and UK plug
    • 11026
    • 38.00€
    • Power supply for DIN rail, 24V / 630mA DC
      (merchandise, 2-year manufacturer’s guarantee)
    • 11080
    • 33.00€
  • Cable and Connector Accessories

    • RS485 screw-in adapter
      (RS485-DB9 Adapter for W&T devices
    • 11909
    • 29.00€
  • Mechanical Accessories

    • Mounting bracket for wall mounting
    • 58812
    • 11.20€
    • 19" DIN rail
    • 58813
    • 21.00€
  • Software

    • Windows COM Port Redirector Legacy
    • 00102
    • free
    • Download
    • Windows COM Port Redirector Win 95/98/Me
    • 00101
    • free
    • Download

* Our offering is intended only for commercial users. We will be happy to refer private end customers to trading partners through whom our products can be purchased.

^