Com-Server LC

Properties

Interfaces:

• 1x RS232/RS422/RS485 selectable
• 1x Ethernet 10/100BaseT
  • Autosensing/Auto-MDIX
• alternate hardware configuration
  • 20mA/TTY version see Com-Server 20mA

Management and connectivity:

• Remote configuration
  • Startup using WuTility (three clicks and you’re done), DHCP, serial
  • Web-Based-Management
  • Telnet
  • Control sockets from your own applications
• Transparent communication
  • Windows COM Port Redirector and virtual COM ports
  • Box-to-Box
  • TCP server sockets from your own applications

Power supply:

• External
  • Screw terminals, 12V-48V DC
• Power-over-Ethernet (PoE)
  • Phantom power using data pairs
  • Power over unused wire pairs

Standards & more

• Conforms to standards both in office and industrial environments:
  • High noise resistance per EN 61000-6-2
  • Low noise emission per EN 55032:2015 + A1 Cl. B, EN 61000-3-2 & EN 61000-3-3
• 5 year guarantee

Run modes

Windows COM Port Redirector

Install the COM Port Redirector and configure your serial program on one of the virtual COM ports - that’s all there is to it! Regardless of whether as a replacement for missing hardware COM ports, a solution for virtual environments like VMware, HyperV, etc., or as a simple line driver, you serial communication becomes network capable without a single line of programming. Multipoint mode and packaging options are of course also available here.
Data sheet with download link

Box-to-Box

In just a few clicks you can link 2 Com-Servers to each other logically and use an operating-system neutral, transparent and if desired TLS encrypted data tunnel through the network. Serial data are sent bi-directional and as fast as possible to the respective counterpart. Automatic reconnect functions in case of connection faults/dropouts are available as are multipoint operation and packeting options for fine tuning when using serial protocols.
To application example ...

TCP socket server

Network programming today belongs to the standard repertoire of all programmers. Integrate your serial device simply into your own network application. Take as a TCP client control of the connection into your own hands, be contacted as a TCP server using event-driven control, or use the efficient, contactless UDP protocol. The new multipoint mode and packaging options are of course available here also.
To application example ...

Expanded version (baud rates, functions, protocols): Com-Server++ 58665

Technical data

Connections and displays:

• Serial port:
  • 1x RS232-, RS422-, RS485 port, selectable
  • DB9 connector plug
  • 50 to 57,600 baud
  • 7,8 data bits
  • 1,2 stop bits
  • Parity No, Even, Odd, Mark, Space
  • Flow control No, RTS/CTS, Xon/Xoff
• Serial modes:
  • RS232
  • RS422 4-wire bus master
  • RS485 4-wire bus master
  • RS485 4 wire with automatic control
  • RS485 2 wire with automatic control
• Network:
  • 10/100BaseT autosensing
  • RJ45
  • IPv6 on request
• Galvanic isolation:
  • Network connection min. 1500 V
• Supply voltage:
  • Power-over-Ethernet (PoE) or
  • DC 12V .. 48V (+/-10%) or
  • AC 18Veff .. 30Veff (+/-10%)
• Supply connection:
  • Plug-in screw terminal, 5.08mm spacing
  • Labeled "L+" and "M"
• Power consumption:
  • PoE Class 1 (0.44 - 3.84W)
  • or for external supply:
  • typ. 55mA @24V DC
  • max. 70mA @24VDC
• Displays:
  • 1 LED Power
  • 1 LED Status
  • 1 LED Error
  • 2 LEDs Network Status

Housing and other data:

• Housing:
  • Plastic compact housing for top-hat rail mount
  • 105x22x75mm (LxWxH)
• Enclosure rating:
  • IP20
• Weight:
  • approx. 105g
• Ambient temperature:
  • Storage: -40..+70°C
  • Operating 0..+60°C (70°C on request)
• Permissible relative humidity:
  • 5..95% RH, non-condensing
• MTBF:
  • 637,767 h @25°C per MIL-HDBK-217
• Life expectancy:
  • > 25 years at 25°C ambient temperature
• Scope of delivery:
  • 1x Com-Server LC
  • 1x Quick Guide

* Our offering is intended only for commercial users. We will be happy to refer private end customers to trading partners through whom our products can be purchased.