W&T connects
Interfaces for TCP/IP, Ethernet, RS-232, RS-485, USB, 20mA, glass and plastic fiber optic cable, http, SNMP, OPC, Modbus TCP, I/O digital, I/O analog, ISA, PCI
Data sheet:

24V /60W power supply for DIN rail mount

60 Watt DIN rail power supply 3 TE wide

Universal LPS power supply with wide range input 100...240V

Product features:

  • 24V / 2.5A power supply for mounting on DIN rails
  • Compact housing cross-section (similar to a circuit breaker)
    • Dimensions: 52.5 x 90 x 54.5 mm
    • allows use of the power supply in building automation control cabinets
  • Flexible in application:
    • Wide range input 100...240V
    • Overvoltage Category III
    • CE Marking and UL Listed
  • High efficiency: typ. 90%
  • Limited Power Source (LPS)
  • Wide operating temperature range: -30,,,+70 deg. Celsius
  • Standards-conformal for both office and industrial environments:
    • Increased noise immunity for industrial areas
    • Stricter noise emission for residential and commercial areas

Background information:

W&T Web-IOs are often used in larger quantities at a centralized location. In such situations a common power supply for the devices makes the application much more transparent than would be the case if the devices were powered individually.

If no 24V supply is available in the installation, this can be elegantly and cost-effectively solved using the 60W model 11081 DIN rail power supply, which can be used to power several 24V devices centrally in the control cabinet.

The power supply can of course also be used where in addition to the 24V supply for the Web-IO component group power is also needed for supplying the rest of the installation. In this case you only need to ensure that the overall power requirements do not exceed the current capacity of the DIN rail power supply.

Technical data:

Output power:  max. 60W
Efficiency: typ. 90%
Input voltage: 85...264V AC
Frequency: 47...63 Hz
Input current: 0.8A at 230V AC
Inrush: max. 60A at 230V AC
No-load losses: <0.3W
Overvoltage Category: III
LPS: Yes
Output voltage: 24V DC (adjustable 21.6...29V)
Tolerance: +/-1%
Ripple: max. 150mV
Rated current: 2.5A
Minimum load: none
Overcurrent limiter: at 105%...160% of rated current
Short circuit protected: Yes
Overvoltage protection: Shutdown at 30...36V
Reset using POWER ON
Start time: 500ms at rated load and 230V AC
Rise time: 50ms at rated load and 230V AC
Voltage bridging: 30ms at nominal load and 230V AC
Cooling: Convection cooling
Dielectric strength: In-Out: 3KV AC
Isolation resistance: In-Out: 100 MOhm at 500VDC
Operating temperature: -30...+70°C, power reducing
from 45...70°C
Storage temperature: -40...+85°C
Relative humidity: Operating: 20...90% relative humidity
Storage: 10...95% relative humidity
Connections: 2-pin input, 4-pin output
with screw terminals
MTBF: >927,600 hours (per
MIL-HDBK-217F at 25° C)
Merchandise: 2-year manufacturer’s guarantee
Weight: 190 g
Dimensions: 52.5 x 90 x 54.5 mm
Approvals: UL, c-UL, TÜV, CB, CE
Safety: Meets
EN61558-1, EN61558-2-16
EMC: Meets
EN 55032 B
EN 61000-3-2, EN 61000-3-3
EN 61000-4-2, EN 61000-4-3
EN 61000-4-4, EN 61000-4-5
EN 61000-4-6, EN 61000-4-8
EN 61000-4-11

Article list

    • Power Supply for DIN rail mount, 24V / 2.5A DC
      (merchandise, 2-year manufacturer’s guarantee)
    • 11081
    • 49.00€

* Our offering is intended only for commercial users. We will be happy to refer private end customers to trading partners through whom our products can be purchased.