Web-Thermograph NTC Web-Thermograph Pt100/Pt1000

• Error in cloud access fixed

Please verify that the device has Version 1.60 before updating!

• Error in CSV output (Celsius/Fahrenheit representation) fixed
• Problem with software support of older hardware generations fixed

Please verify that the device has Version 1.60 before updating!

• New: Functionality for sending measurement values to the W&T cloud added
• Current configuration settings added to MIB

Please verify that the device has Version 1.60 before updating!

• SSL/TLS transmission stabilised
• User login blocked/waits for the end of the encrypted transmission
• System performance increased browser access accelerated
• Error corrections made to the graphical value display
• New: Encrypted e-mail sending using SSL/TLS
• New: Bi-language firmware: German/English selectable

Please verify that the device has Version 1.60 before updating!

• Flash codes for emergency access/Factory Default Reset revised
• New: Encrypted e-mail sending using SSL/TLS
• New: Bi-language firmware: German/English selectable

Firmware 1.82 or higher for WuTility v.3.82 or higher for loading into devices!

Please verify that the device has Version 1.60 before updating!

• Password entry for language selection added
• New: Encrypted e-mail sending using SSL/TLS
• New: Bi-language firmware: German/English selectable

The firmware 1.81 requires WuTility v.3.82 or higher for loading into devices!

Please verify that the device has Version 1.60 or higher before updating!

• New: Encrypted e-mail sending using SSL/TLS
• New: Bi-language firmware: German/English selectable
• Problems with representing negative values in the graphical display fixed.

Before updating to V1.80 all passwords must be deleted from the device so that login is possible after the update. You can reassign them after the update.

The firmware 1.80 requires WuTility v.3.82 or higher for loading into devices!

Please verify that the device has Version 1.60 before updating!

• Error in Java applet eliminated
• Problems with device start with full data logger eliminated
• Problem eliminated: Output of empty files for FTP alarm
• Multiple DNS resolution for mail revised
• New: Error output on the diagnostics page with time stamp

The firmware 1.75 requires WuTility v.3.82 or higher for loading into devices!

Please verify that the device has Version 1.60 before updating!

• Error on internal data sheet corrected

The firmware 1.75 requires WuTility v.3.82 or higher for loading into devices!

Please verify that the device has Version 1.60 before updating!

• Problems with DHCP functionality eliminated
• Error in SNMP MIB corrected (57614 only)

The firmware 1.72 requires WuTility v.3.82 or higher for loading into devices!

Please verify that the device has Version 1.60 before updating!

• Corrections in test alarm for timer triggered alarms
• Mail: Authentication for ESMTP: larger line buffer
• Mail: Logon for long server names failed

The firmware 1.72 requires WuTility v.3.82 or higher for loading into devices!

Please verify that the device has Version 1.60 before updating!

• Corrections in Java applet
• Corrections in time-synchronous output for timer trigger

The firmware 1.71 requires WuTility v.3.82 or higher for loading into devices!

Please verify that the device has Version 1.60 before updating!

• Corrections in device BIOS
• Updated script files for the home page

The firmware 1.70 requires WuTility v.3.82 or higher for loading into devices!

Please verify that the device has Version 1.60 before updating!

• New: Ability to register devices (WuTility 3.85 and higher)
• DNS polling now also via TCP and UDP

The firmware 1.69 requires WuTility v.3.82 or higher for loading into devices!

Please verify that the device has Version 1.60 before updating!

• Error in device BIOS eliminated
• New: Smart.htm page for display on smartphones/cell phones
• New: Inputs switchable between °C,
  °Fahrenheit and Kelvin

The firmware 1.68 requires WuTility v.3.82 or higher for loading into devices!

Please verify that the device has Version 1.60 before updating!

• Boot-up behavior optimized

• Error corrected: DNS resolving for mail sending + port no. did not function
• New: New W&T tag: <DN> for outputting the system name in a mail
• New: Check Alarm function for testing an alarm
• New: new OID; measurement values can be read via SNMP with decimal separation
• New: Command line parameter for start and stop time of the CSV download

• Progress bar for backing up the factory defaults inserted

• Problem eliminated: Line breaks in text fields were incorrectly interpreted

• Problem eliminated: Wrong identifier in XML configuration
• Problem eliminated: Output format error for negative UTC offset
• Error corrections for graphical output
• Minimum length of Ethernet frames adjusted
• Reset behavior in DHCP mode revised

• New: Send alarm/report directly overTwitter™.
• New: Subscribe to RSS feed
• Error corrections for graphical output

• New: Send alarm/report directly overTwitter™.
• Problems resolved: Increment/recording greater than 1 min. caused problems in CSV output
• Various improvements in graphic display

• Problem resolved: Entering of hex values in SNMP was rejected
• Sensor detection after firmware update revised
• Lockout of Save, Restore, Logout buttons with progress display
• Problem with mail authentication resolved

• Problem in the e-mail report function resolved

• Problem in SNMP/UDP communication resolved

• New user tags: <AA>, <AS>, <AN>
  (see current manual)
• DHCP client revised

• ESMTP authentication revised
• Improvements in operation on switches/hubs with Mac-based authentication
• Display problem with chart view eliminated
• Display problem when using the integrated Java applet eliminated
• Problem with DNS resolution eliminated

With this version or higher please use
at least WuTIlity 3.61 or the
current version available at www.wut.de

• A/D converter for communication improved
• Alarm routine revised
• FTP login without password revised
• All downloads now available as attachment
• Java applet revised
• Alarm display in Javascript corrected
• Mail: "CSV-Data since last report" optimized

Note: With this version or higher please use
at least WuTIlity 3.51 or the
current version available at www.wut.de

• Temperatures below -65 degrees C were not displayed with older hardware
• The system name is no longer overwritten when updating, rather only when performing a Factory Default Reset
• Internet link to www.wut.de contains only the expression "http://". This is automatically completed when updating

With this version or higher please use
at least WuTIlity 3.46 or the
current version available at www.wut.de

• Optimized handling at restart when memory is full and there are strung data records
• Integrity of the data logger when time server fails ensured
• XML and CSV download accelerated
• CSV download no longer handled by EXCEL plug-in but rather using direct file download

For this version and higher please use the
included WuTility 3.46 or the
current version available at www.wut.de

• Error in cloud access fixed

Please verify that the device has Version 1.60 before updating!

• Error in CSV output (Celsius/Fahrenheit representation) fixed
• Problem with software support of older hardware generations fixed

Please verify that the device has Version 1.60 before updating!

• New: Functionality for sending measurement values to the W&T cloud added
• Current configuration settings added to MIB

Please verify that the device has Version 1.60 before updating!

• SSL/TLS transmission stabilised
• User login blocked/waits for the end of the encrypted transmission
• System performance increased browser access accelerated
• Error corrections made to the graphical value display
• New: Encrypted e-mail sending using SSL/TLS
• New: Bi-language firmware: German/English selectable

Please verify that the device has Version 1.60 before updating!

• Flash codes for emergency access/Factory Default Reset revised
• New: Encrypted e-mail sending using SSL/TLS
• New: Bi-language firmware: German/English selectable

Firmware 1.82 or higher for WuTility v.3.82 or higher for loading into devices!

Please verify that the device has Version 1.60 before updating!

• Password entry for language selection added
• New: Encrypted e-mail sending using SSL/TLS
• New: Bi-language firmware: German/English selectable

The firmware 1.81 requires WuTility v.3.82 or higher for loading into devices!

Please verify that the device has Version 1.60 or higher before updating!

• New: Encrypted e-mail sending using SSL/TLS
• New: Bi-language firmware: German/English selectable
• Problems with representing negative values in the graphical display fixed.

Before updating to V1.80 all passwords must be deleted from the device so that login is possible after the update. You can reassign them after the update.

The firmware 1.80 requires WuTility v.3.82 or higher for loading into devices!

Please verify that the device has Version 1.60 before updating!

• Error in Java applet eliminated
• Problems with device start with full data logger eliminated
• Problem eliminated: Output of empty files for FTP alarm
• Multiple DNS resolution for mail revised
• New: Error output on the diagnostics page with time stamp

The firmware 1.75 requires WuTility v.3.82 or higher for loading into devices!

Please verify that the device has Version 1.60 before updating!

• Error on internal data sheet corrected

The firmware 1.75 requires WuTility v.3.82 or higher for loading into devices!

Please verify that the device has Version 1.60 before updating!

• Problems with DHCP functionality eliminated
• Error in SNMP MIB corrected (57614 only)

The firmware 1.72 requires WuTility v.3.82 or higher for loading into devices!

Please verify that the device has Version 1.60 before updating!

• Corrections in test alarm for timer triggered alarms
• Mail: Authentication for ESMTP: larger line buffer
• Mail: Logon for long server names failed

The firmware 1.72 requires WuTility v.3.82 or higher for loading into devices!

Please verify that the device has Version 1.60 before updating!

• Corrections in Java applet
• Corrections in time-synchronous output for timer trigger

The firmware 1.71 requires WuTility v.3.82 or higher for loading into devices!

Please verify that the device has Version 1.60 before updating!

• Corrections in device BIOS
• Updated script files for the home page

The firmware 1.70 requires WuTility v.3.82 or higher for loading into devices!

Please verify that the device has Version 1.60 before updating!

• New: Ability to register devices (WuTility 3.85 and higher)
• DNS polling now also via TCP and UDP

The firmware 1.69 requires WuTility v.3.82 or higher for loading into devices!

Please verify that the device has Version 1.60 before updating!

• Error in device BIOS eliminated
• New: Smart.htm page for display on smartphones/cell phones
• New: Inputs switchable between °C,
  °Fahrenheit and Kelvin

The firmware 1.68 requires WuTility v.3.82 or higher for loading into devices!

Please verify that the device has Version 1.60 before updating!

• Boot-up behavior optimized

• Error corrected: DNS resolving for mail sending + port no. did not function
• New: New W&T tag: <DN> for outputting the system name in a mail
• New: Check Alarm function for testing an alarm
• New: new OID; measurement values can be read via SNMP with decimal separation
• New: Command line parameter for start and stop time of the CSV download

• Progress bar for backing up the factory defaults inserted

• Problem eliminated: Line breaks in text fields were incorrectly interpreted

• Problem eliminated: Wrong identifier in XML configuration
• Problem eliminated: Output format error for negative UTC offset
• Error corrections for graphical output
• Minimum length of Ethernet frames adjusted
• Reset behavior in DHCP mode revised

• New: Send alarm/report directly overTwitter™.
• New: Subscribe to RSS feed
• Error corrections for graphical output

• New: Send alarm/report directly overTwitter™.
• Problems resolved: Increment/recording greater than 1 min. caused problems in CSV output
• Various improvements in graphic display

• Problem resolved: Entering of hex values in SNMP was rejected
• Sensor detection after firmware update revised
• Lockout of Save, Restore, Logout buttons with progress display
• Problem with mail authentication resolved

• Problem in the e-mail report function resolved

• Problem in SNMP/UDP communication resolved

• New user tags: <AA>, <AS>, <AN>
  (see current manual)
• DHCP client revised

• ESMTP authentication revised
• Improvements in operation on switches/hubs with Mac-based authentication
• Display problem with chart view eliminated
• Display problem when using the integrated Java applet eliminated
• Problem with DNS resolution eliminated

With this version or higher please use
at least WuTIlity 3.61 or the
current version available at www.wut.de

• A/D converter for communication improved
• Alarm routine revised
• FTP login without password revised
• All downloads now available as attachment
• Java applet revised
• Alarm display in Javascript corrected
• Mail: "CSV-Data since last report" optimized

Note: With this version or higher please use
at least WuTIlity 3.51 or the
current version available at www.wut.de

• Temperatures below -65 degrees C were not displayed with older hardware
• The system name is no longer overwritten when updating, rather only when performing a Factory Default Reset
• Internet link to www.wut.de contains only the expression "http://". This is automatically completed when updating

With this version or higher please use
at least WuTIlity 3.46 or the
current version available at www.wut.de

• Optimized handling at restart when memory is full and there are strung data records
• Integrity of the data logger when time server fails ensured
• XML and CSV download accelerated
• CSV download no longer handled by EXCEL plug-in but rather using direct file download

For this version and higher please use the
included WuTility 3.46 or the
current version available at www.wut.de